How to Adjust a Mechanical Thermostat How to Calibrate Thermostat (DIY

Heat Anticipator Setting. Heat Anticipator Settings on room thermostats How & Why to Adjust the A typical heat anticipator scale runs beetween a low of 0.10 Amps and a high of about 1.2 Amps How Should You Accurately Determine The Heat Anticipator Setting On A Room Thermostat? Aside from moving the setting up and down until you reach a satisfactory comfort level, there is a technical way to adjust the anticipator

Locate the heat anticipator adjustment lever arm (Photo 2) ‌Heat is staying on too long‌ (after the set temperature is reached): move the anticipator needle DOWN by 0.1 on the amp scale.

Honeywell T8190A Heating or Cooling Thermostat Installation Guide

‌Heat is staying on too long‌ (after the set temperature is reached): move the anticipator needle DOWN by 0.1 on the amp scale. The direction to move the needle depends on what you're experiencing: ‌Heat is shutting off too early‌ (before the room gets to the set temperature): move the anticipator needle UP by 0.1 on the amp scale If the room temperature is either too hot or too cold for long periods, move the lever closer to the "longer" setting by one calibration mark

Heat Anticipator Setting on room thermostat. The direction to move the needle depends on what you're experiencing: ‌Heat is shutting off too early‌ (before the room gets to the set temperature): move the anticipator needle UP by 0.1 on the amp scale Lower heat anticipator settings: According to Honeywell, setting the heat anticipator to a lower number (lower Amps number) setting will result in shorter burner on-cycles, ie less room-temperature overshoot

Thermostat Heat Anticipator Adjustment (A Simple Guide) Home Heat. Use a Mini- Ammeter to Set & Test the Heat Anticipator. If you have a clamp on the ammeter, wrap 10 (ten) turns of wire around the pick-up and read the current and divide by 10.